Flannery Oconnor And The South Essays - Good Country People

Flannery O'connor And The South A Good Man Is Hard To Find and Good Country People are two short stories written by Flannery OConnor during her short lived writing career. Despite the literary achievements of OConnors works, she is often criticized for the grotesqueness of her characters and endings of her short stories and novels. Her writings have been described as understated, orderly, unexperimental fiction, with a Southern backdrop and a Roman Catholic vision, in defiance, it would seem, of those restless innovators who preceded her and who came into prominence after her death(Friedman 4). A Good Man Is Hard To Find and Good Country People are both set in the South, and OConnor explores the tension between the old and new South. The stories are tow ironically twisted tales of different families whos lives are altered after trusting a stranger, only to be mislead. Each story explores the themes of Christian theology, new verses the old South, and fallen human nature. In A Good Man Is Hard To Find, OConnor introduces the reader to a family representative of the old and new Southern culture. The grandmother represents the old South by the way in which she focuses on her appearnace, manners, and gentile ladylike behavior. OConnor writes her collars and cuffs were organdy trimmed with lace and at her neckline she had pinned a purple spray of cloth violets containing a sachet. In case of an accident, anyone seeing her dead on the highway would know at once that she was a lady(OConnor 118). In this short story, the wild diproportion of the terms, the vapid composure that summons up the ultimate violence only to treat it as a rare social opportuinty, and the cool irony with which OConnor presents the sentence makes it both fearful and ludicrous(Asals 132). The irony that OConnor uses points out the appalling characteristics of the grandmothers self-deception that her clothes make her a lady and turns it into a comic matter. Flannery OConnor goes to grea t length to give the reader insight into the characters by describing their clothes and attitudes. The fact that the grandmother took so much time in preparing herself for the trip exemplifies the old Southern tradition of self-presentation and self-pride. The grandmother takes pride in the way she presents herself because she wants everyone to know that she is a lady. Baileys, the grandsons, family represents that of the new Southern culture that is more open to change, but they are not totally receptive to change. OConnor describes the childrens mother in contrast to the grandmother by what they are wearing; thus their clothes represent the age from which they are. The Childrens mother still had on slacks and still had her head tied up in a green kerchief, but the grandmother had on navy blue straw sailor hat with a bunch of white dot in the print(OConnor 118). The childrens mother is representative of the New South in which the Southern Lady is becoming less of a central figure within society. A lady of the old south would never wear slacks and tie her hair up in a kerchief to go out in public. Under an old south mentality these actions would be considered very unlady like. OConnor illustrates the tension between the old and the new south by the constant struggle between the grandmother, her son, and the daughter-in-law. OConnor also poses the contrast between the old and new South in her short story Good Country People. Mrs. Hopewell and Mrs. Freeman represent the old South because of the way in which they carry themselves and their traditional beliefs and values. Mrs. Freeman works for Mrs. Hopewell who states the reason for her keepin her so long was that they were not trash. They were good country people(OConnor 272). Mrs. Hopewell describes Mrs. Freeman and her two daughters as two of the finest girls she knew and Mrs. Freeman was a lady and that she was never ashamed to take her anywhere or introduce her to anybody they might mett(OConnor 272). In contrast to Mrs. Freeman and Mrs. Hopewell, Joy/Hulga represents the new south that is not concerned with self presentation in the way that the grandmother is in A

Polonius is an interesting Essays

Polonius is an interesting Essays Polonius is an interesting Paper Polonius is an interesting Paper Essay Topic: Interesting The characters play important roles in Shakespeares Hamlet. Each character is unique in his of her contribution to the entire play. Without certain characters, the play would not have the same effect. Polonius is an interesting and complicated character who plays an important part in Hamlet. Although he is not one of the main characters, Polonius serves as the nosy chief counselor to King Claudius. Poloniuss destructive personality and meddling behavior leads to his fatal end. Poloniuss first extended speaking scene is in Act I, Scene 3. In this scene, Laertes is speaking to his sister Ophelia about Hamlets attention towards her. He warns her to protect her virtues. Polonius arrives and reminds his son that he should be on his way to Paris. Right after Laertes leaves, Polonius turns to his daughter and asks her what they were discussing before he entered the room. Although it may be common for a father to be concern with his daughters life, Polonius did not act concerned- just ignorant and criticizing. The lack of Poloniuss concern can be read in his responses to Ophelia. Right after she reveals that they were talking about Hamlet, Polonius criticized her. When Ophelia explains to her father that Laertes was concerned about Hamlets late made many tenders (1. 3. 108), Polonius just scoffs at the idea of Hamlet being attentive towards her. His words are blunt and unkind. He calls Ophelia a woodcock (1. 3. 124), which is a gullible bird. Polonius does not consider his daughters feelings for Hamlet. He continues to warn her to conduct herself well so she does not make him appear a fool. He forbids her from seeing Hamlet for the wrong, selfish reasons. In this scene, Poloniuss character displays a selfish nature where he only cares about his image. His rudeness to his daughter shows that he does not care about her. Instead, he is suspicious that she might ruin his reputation and that Hamlet has the worst intentions for Ophelia. Polonius is selfish, suspicious, and uncaring. The suspicious trait later plays a part in Claudiuss death when he is trying to find out the reason behind Hamlets insanity. Polonius is meddling in his sons life in Act II, Scene 1. Before Laertes departs to Paris, Polonius gave him some last words of advice. Polonius reminds him thou canst not be false to any man (1. 3. 83) and to thine own self be true (1.3. 84). Polonius is asking his son to be honorable and virtuous. Polonius is hypocritical for giving his son this advice because he is not trusting of his own son. After his son leaves, he sends Reynaldo to follow Laertes to Paris to find out how he is conducting himself. Polonius does not trust his son and does the dishonorable thing of sending a spy. Why would Polonius give Laertes fatherly advice and still not trust his son? This shows another weakness of Polonius. He cannot learn to trust others. He is a hypocrite for asking his son to be honorable when he cannot listen to his own advice. Polonius is proven not to be an honorable man and this ironically is how he was killed. Polonius did the unthinkable act of spying and eavesdropping on a private conversation and is killed. If Polonius had listen to his own advice to his son, Polonius would have never mettle in Hamlets life and continually spy on him. Poloniuss job is to be King Claudiuss chief counselor. Part of the job description is to help Claudius sort out information and make wise decisions. But there are moments when it seems as though Polonius wants to make the final word, as oppose to letting Claudius make the final decision. This shows that Polonius likes to meddle in other peoples business, including his own kings life. Polonius does not let other people live their lives without his words. Being nosy is the reason why Polonius got involved with Hamlets sanity issue and leads Polonius to his death later in the play. In Act II, Scene 2, Polonius suggests a reason for Hamlets sudden lunacy. He believes the reason is that Ophelia refuses to see Hamlet and that alone has driven Hamlet into madness. Polonius devises a plan where he will let Ophelia talk to Hamlet. During their encounter, Polonius and Claudius will observe the situation from a hidden area. From this encounter, Polonius ensures Claudius that they will find the true reason for Hamlets madness. Poloniuss insensitivity towards Ophelias situation is shown when he uses her for his personal plans. He does not take her feelings into consideration and uses her as a prop to impress Claudius. But Poloniuss plan did not please Claudius. After watching the couple interacts, Claudius is now convinced that love is not the cause of Hamlets craziness. Dissatisfied that the King did not agree with his theory, Polonius urges one last attempt to find out Hamlets secret. Polonius is desperate to convince the King that his theory is right. Polonius wants to please Claudius, but he also does not want to be wrong. As a counselor, he should be obedient to the King. Instead, he tries to control Claudius by ignoring Claudiuss theory and convinces him to give one last attempt to find the whole truth. Little did he know his last meddling in Hamlets life would be a fatal one. Poloniuss life ends tragically. While hiding behind the arras and eavesdropping on Hamlet and Queen Gertrude, Polonius is convinced the truth would be revealed. Polonius is meddling in Hamlets life by getting involved in a situation that has nothing to do with him. During Hamlets and Gertrudes conversation, she is frightened by Hamlet which prompts Polonius to echo a cry out for help. Thinking Polonius was the king, Hamlet thrusts his rapier into the arras and kills him, whom Hamlet describes as a fool (3. 4. 38). Even Hamlet recognizes that Poloniuss death is avoidable if only he had stayed out of everyones personal business. Poloniuss sudden death is caused by his nosy, meddling ways. He is out to seek the truth about Hamlet and, ironically, is killed by Hamlet. If Polonius stopped meddling in Hamlets life in Act II, Scene 1, he would still be alive to be by the Kings side. Instead, he forces his way into finding secrets that do not involves him and ends up dead. Poloniuss destructive and prying personality is what kills him. Polonius plays an important role in Shakespeares play Hamlet. He meddles in other characters lives. He also sticks his nose into others situations. He is a selfish, suspicious, dishonorable, and nosy. These qualities are destructive and that is why his life ended so tragically. Poloniuss early death foreshadows the other characters deaths later in the play.

To Be Determined Essay Example | Topics and Well Written Essays - 1500 words

To Be Determined - Essay Example ed can come of the pure love (or lust) that these two men (the Duke and the Lover) seemed to want to shower on the two women who are the subjects (and objects) of these poems. These are apparently two women who had the men in their lives so afraid of losing their love that they killed to keep them where they wanted them, to control them or at least to control the moment, whether it was in the frame of a portrait or on the bed or couch that the two lovers last shared with one another. One of them even sat up and waited all night for God to come get him for the sin and the crime. If Porphyria’s lover was waiting for God to react to his selfish deed with punishment of some kind, (presumably with a bolt of lightning strategically placed to his left temple for the commission of the act of murder) why did he not just go ahead and kill himself, too? The main overall theme of both Robert Browning poems â€Å"My Last Duchess† (hereafter known as â€Å"Duchess†) and â€Å"Porphyria’s Lover† (hereafter known as â€Å"Lover†) is jealousy; as in jealousy mixed with contempt for beautiful women, all the way to the point of literal physical death. The relationship between Porphyria and her lover is positive and has a strong bond. This is why it appears that he (the Lover) could not deal with the thought of being without her. In â€Å"Duchess,† the woman that is the target of the Duke’s affection (worship nearly) has already passed on and all he has left of her is the painting on the wall, to which he, the narrator of the poem, refers at the very beginning. In â€Å"Lover,† the script is flipped. It is the object of the speaker’s discussion (the lady Porphyria) who nearly worships her man instead. He says this directly. (Browning, ll’s 32 and 33 â€Å"Happy and proud; at last I knew Porphyria worshippd me†¦Ã¢â‚¬ ). It is with these 10 words that the narrator of the story tells us that he realizes how far she had come to tell him of her love, and he then reveals to us, the

Movie Glory Review Example | Topics and Well Written Essays - 250 words

Glory - Movie Review Example This paper will highlight how the Zwick depicts the determination of black men. The blacks forming part of the first infantry that would train blacks in readiness for entry into the military forces were not doing it for the war sake only. The infantry presented them with an opportunity to prove that blacks possessed a lot of potential that the whites had chosen to notice. The movie targets to inform anyone who has an interest in knowing the dark sides of American history. The movie depicts a high level of teamwork and pursues of a common goal. These blacks needed endurance, persistence, and resilience to survive the tough training. They took the challenges in order to prove to the whites that they deserved more than the society had given them. Most of these soldiers had been slaving before, and their esteem was low. However, the producer of the movie shows clearly that these blacks made the best of the opportunity. In the civil war staged to determine whether they had gained war skills, they managed to prove to the world and to themselves that they deserved a l ot more in society. Despite the price they paid at war, the blacks achieved their goal. Shaw, the commanding officer in the infantry pushed the blacks beyond their limits forcing them to unleash the best of their potential. Throughout the training, Shaw wanted to improve their expertise and competence in fighting. The movie is suitable for viewers with historical interest. The producer succeeds in highlighting the teamwork and determination of blacks to prove their competence in the military department opening an opportunity for more black

Autobiography of Benjamin Franklin Essay Example | Topics and Well Written Essays - 1000 words - 1

Autobiography of Benjamin Franklin - Essay Example If one were to seek a comprehensive account of Franklin’s perspective most people look to the Autobiography of Benjamin Franklin. This essay examines this text in terms of the means that Franklin presents his story as an illustration of self-improvement. One of the prominent ways that Benjamin Franklin explores themes of self-improvement is through his articulation of his own education. As is common knowledge Franklin was largely a self-taught individual. In the first part of his text, Franklin indicates that, â€Å"From a child I was fond of reading, and all the little money that came into my hands was ever laid out in books† (Franklin, p. 14). Franklin also indicates specific books he read. While not entirely presented as a path towards self-education, it’s clear that Franklin at least indirectly intends the reader to recognize that reading and intellectual pursuit were important aspects to his development. Franklin leaves it for the reader to then extract from these examples for their own self-improvement. A notable concern in these regards is that Franklin is not extremely over-handed in his presentation of life examples. For instance, at different instances he points out individuals he thought more intelligent or successful than himself. This mix of frank self-reflection with a touch of self-promotion is very successful as an instrument of self-improvement for others. Another prominent concern in examining the text as one of self-improvement is the means that Franklin traces his professional development. Similar to Franklin’s education this development process is not presented in an entirely over-handed or moralizing way, but instead is indicative of a true to form narrative account. In these regards, Franklin details how his interest in books led to his becoming involved in a printing press and the subsequent professional and personal developments he gained through this business. When Franklin does make proscriptive moral persp ectives on life he does so in the context of his story. Consider Franklin when he notes, â€Å"I grew convinc'd that truth, sincerity and integrity in dealings between man and man were of the utmost importance to the felicity of life† (Franklin, p. 58). This statement emerges when Franklin is talking about the influence his parents and religion had on his life. In these regards, Franklin’s autobiography does not sound preachy or overly self-aggrandizing, but the work of a benevolent man that has attained wisdom through hard-work and life experience. As Franklin’s text progresses it slightly veers from this narrative presentation to one more self-consciously concerned with presenting a map of self-improvement. A prominent example of this occurs in the second part when Franklin lists a letter he received encouraging him to continue writing his autobiography as it could be used as a means of self-improvement. Franklin extends this as he explores his pursuit of mora l perfection, outlining twelve points of character that he attempted to improve. While the first part of Franklin’s autobiography was highly reliant on the narrative progression of events that led to his personal and professional development, Franklin’s pursuit of moral perfection and his elaborate charts and diagrams demonstrating how he did so begins to squarely cast him as the first American version of Dr. Phil. Rather than his pursuit of mo

Contours in Construction

Contours in Construction Table of Contents (Jump to) Introduction What is Contour? Contours need to determine the level at various points on the ground, and in the same horizontal position of those points should be fixed. Vertical control exercise carried out leveling work, but the level of control exercised chain survey or questionnaire survey compass or aircraft to be. If the theodolite horizontal and vertical control can be achieved from the same instrument. A profile can be classified in different groups based instrument. Contour function that can be used to understand the shape of the land. In addition, the actual pattern of the line will phone you to more detailed understanding of the region. Besides that, contour are divided into two types of methods in surveying which is direct methods and indirect methods. For the direct methods, It is included in the point found within the selected contour line of vertical and horizontal control. Instrument used for vertical control level. A grade level is set to take flight from the commanding heights of the nearby bench mark in the region. Collimation / height of the plane of the instrument was found the staff to be read a contour line is calculated. The staff of the instrument man asked the staff who cultivate the required reading is found up and down movement in the region. Surveyor built using his tools of this level of control. After the people of the instrument directs staff person to read another point in the same person can be found. Second is to establish the level of control. Therefore, a few points are based on a contour of one or two contour lines and proper record. Plane table survey is very suitable for the job. After setting the points needed for the establishment of the instrument from the instrument is moved to another point in order to cover a larger area. Level and investigative tools need not be shifted simultaneously. That is, if two are nearby, so easy to communicate better. Get speed leveling sometimes hand level, Abney level of use. This approach is slow, tedious and inaccurate. It is suitable for small areas. While for the indirect methods, the level of take in some selected points and their reduced levels. Thus, in this method to establish the level of control the first, then find the level of those points. After positioning point plan, the level of decline is inserted between the selection point markers and contour lines. Sources: (Methods of Contouring 2014) Diagram 1: Labeling Contour Maps (Sources: http://upload.wikimedia.org/wikipedia/commons/thumb/f/fa/Cntr-map-1.jpg/300px-Cntr-map-1.jpg) What is Autocad? AutoCAD is used in buildings, bridges, and computer chip manufacturing blueprint for a computer-aided drawing software program. AutoCAD is mainly used for drafters, it has occurred although engineers, surveyors and architects may need to use the software. Read on to learn more. AutoCAD is in the building, construction and manufacturing for the 2-D and 3-D computer-aided drawing software applications assist blueprints and other projects prepared. Who uses AutoCAD professionals often referred to the drafting. Although the drafters in some professional work, six of the most common areas of expertise are mechanical drawing, architectural drafting, civil drafting, electrical drafting, electronic drafting, drafting aviation. Methodology: In methodology, I will describe the step that how we produce and plot a contour plan and ground section . First step is to spot the height data. At the commend there, we key it the point and enter it. After we enter, it will show a specify point then we will key in the first point which is S1. For example; 146.048, 313.212, 82.739. So we will key it this point and for the rest of the point like S2, S3, S4 and S5 is using the same methods. (Refer to diagram 1) Diagram 1 After we state the specify point, we using the lines to draw a one long lines at the horizontal and vertical. After we draw a two lines, then we will click the line and type OFFSET, this will ask the distance between two lines and the distance is 25, so we key in 25 and enter it. Then we will click the lines beside the first lines and it will show a new lines. While it was the same step as a vertical part. Make sure that the specify point it inside the box that we do. Besides that, before we draw the lines, to make sure the lines is straight we will click ORTHO MODE from shortcut we can click F8, this will automatically to help you line become straight. (refer to diagram 2) Diagram 2 While next step is we firs go to home page , then we click Layer Properties. Then we will separate few layers should be use for the Buildings, Grid, Spot Height, Text, Border, Contours, Triangulated Ground Model (TGM) and Dimensions (refer to diagram 3). Then we click the point that we key in that five specify point and put it into spot heights categories. While for the boxes, we will put it into the grid categories. After that, we turn off the spot height and grid light bulbs. Then we will select line and key in the point A which is 168.934, 297.370. While for the rest in some step but after we key in until point F we have to key in back to point A, then the building shape we be shown up which is building 1. While for the Building 2, is same as the building 1 just key in the coordinate. After we got this two building 1 and 2 we put it as a building categories which is highlight building 1 and 2 and click the layout and select buildings column. (refer to diagram 4) Diagram 3 4 After it, turn on all the light bulbs and select text and key in the word which can see from the drawings. And the font size of the text is 3.5. The text have to key in is A, B, C, D, E, F, G, H, I, J, Building 1, Building 2, S1 (82.739), S2 (82.789), S3 (86.479), S4 (85.539) and last is S5 (84.039) (refer to diagram 5) . Then we highlight or the text put it as a text categories. While next is find the dimension between D and G. First click to Annotate which is upper the column and then modify the dimension, select the text and key in the size is 3.5 and click ok. Then we click the OBJECT SNAP which is can click from the keyboard which is F3. This will help you to detect the point from D and G. Then we click the dimension from the Annotate and click from D to G. Then above the line, it will show the distance between 2 points. While for the point E and J is same step, so we just repeated it. Then we highlight the two dimension and put it into dimension categories. (refer to diagram 5) Diagram 5 Next step is to draw a triangulated shape by using the lines from S1 to S2 and S5, then S2 to S3 and S5, Then S4 will go to S4 and S5 and S4 will go to S1 and S5. Which is means connect all the point together by using the lines. Therefore we can see the pattern is like that diagram below. Then we highlight the lines for connect to each point, and put it into the Triangulated Ground Model. ( ps: just highlight the lines not the point like diagram below ) Diagram 6 After that, we click the draws which is under the lines, polyline and circle column. We select the multiple points and click the point from S1 to S4 about two point. Let say from S1 to S4 the two point is 82 and 85, therefore the number in between this two point is 83 and 84. So we will click two point between S 1 and S4 but the distance of the point must be medium of this two point and logical dont simply click. While S1 to S5 we will click one point. And from S5 to S3 also got one point. And last from the S2 and S3 got 3 point (refer to diagram 7). After we key in the point, the select the polyline and attach the point. While it is divided into 3 lines. The first line is from the upper point which is 83 coordinate, go to the point which is S1 to S5 and go to the upper point which is S2 to S3. While the second lines is start from second point (S1 to S4 there) go to point S5 and last go to second point ( S2 to S3). While the third lines is from S4 to the point between (S5 to S3) and last is go to last third point for S2 and S3. If not clearly, please refer to diagram 2 and it will be understand, what am I mention about. After that, we highlight the first lines and key it PEDIT and select spline. Then the line will be slightly spline. While for the other line is same step as a line 1, highlight the line key in PEDIT and select SPLINE. While the point that use multiples points and the lines highlight all and put it into Contour categories. Diagram 7 While the last step is draw a rectangular , above the grids for key in the student name and matrix ID. And last is to difference categories using the difference color like diagram 8. Diagram 8 Conclusion: In my conclusion, to design the 2D or 3D drawings is not a easy work by using manually. AutoCAD is in various fields, such as construction, mechanical, structural, civil, electrical and mechanical engineering and automotive applications. An architect can design creative ideal in any part of the building model of any type. For more information about AutoCAD, make complex projects simple. It combines the work of architects and engineers. From a small to a very large project, you get a precise design has great resolution. Its one of the basic drafting software, which is prominently used everywhere. Learn the software will provide design software and drawing software in the field of solid foundation. All mechanical engineers know, the prototype can be a very expensive process. The AutoCAD by eliminating the physical material and preliminary design workshop space allows significant savings in the design process. Although the purchase and operation of a software package has some costs, whi ch tend to be much less than the cost burden of the material and prototype shop when. As a digital simulation, AutoCAD models also allow engineers to test large-scale installations, this process will be costly physical prototypes advantage. Task 2:  Explain how to determine areas and volume of cut and fill, using surveying data (Pass). In planning the building design and construction, architects and engineers must first consider the existing conditions of the site. In most cases, a given site is not level and must be modified before any construction can begin. Therefore, the process of cut and fill construction process is usually the first to take place at a site in one. If there is no computer software to determine the amount of land to be added or removed, we can do a simple calculation to estimate the volume of cut and fill any site. First, the site is divided into sections. Essentially, the site is cut into the land segment, at a specified fixed distance, so we can look at each independent. Cutout portion is based on the land, in order to accurately represent the land topography being evaluated drawn. Topographic map describes the existing slope of land, and allows us to come to the site at an altitude of some of our cuts. Now, we have a two-dimensional cross-section is divided, we can estimate that the area to be cut and filled in the site. Each part of the cut to the desired land topography is expressed as cut line covered in the existing topography of the land line. Which brings us to two lines of each section, and tell us how many of the existing area must be removed or added. Then, the area between the lines is calculated to find the cut-and-fill each sub-region. The figure below shows the existing level lines and cutting area between the lines. From the diagram below, we can see that the start estimate how much land area must be cut off from the scene, and how much land area of the construction site must be completed field level. Diagram 9: Cut and fill Now, once part of the region has been found, we must consider the site (land between the cut portion) of additional length to be able to estimate the volume of land cut or fill. Finally, after the calculated value required us to determine not only how much land must be removed from or sponsors website, but also where the land must be specifically taken or sponsor. Remove or add any site land is an expensive process, so that our estimates are made close to the existing conditions may be important. Once we know how much land to cut or fill and cut and fill it, work can begin normal level site and build our building. Sources: (Cut and Fill 2015) Bibliography Cut and Fill, (2015), [Online], Available at: http://jwilson.coe.uga.edu/EMAT6680/Parsons/MVP6690/Essay3/cutfill.html [Accessed on 1st June 2015] Methods of Contouring, (2014), [Online], Available at: http://theconstructor.org/surveying/methods-of-contouring/6451/ [Accessed on 31 May 2015]     Ã‚  

Nelly Dean of Emily Brontes Wuthering Heights :: free essay writer

Wuthering Heights - Nelly   In the book Wuthering Heights, the author, Emily Bronte, made Nelly the narrator. Many have questioned why Bronte would do so. Nelly never really had a life of her own because she lived at Wuthering Heights all her life.   Therefore, Wuthering Heights and Thrushcross Grange was her life.   Nelly was more than a servant, and had a personal relationship with most of the characters,which is why her story is so efficient, and her lack of knowledge not as important.   She really loved them, and she shows it when she says, "I kissed Hareton good-bye; and since then he has been a stranger: and it's queer to think it, but I've no doubt he has completely forgotten all about Ellen Dean, and that he was ever more than all the world to her and she to him!" (Wuthering Heights Pg. 81)   Hareton probably doesn't remember her, but that shows the lack of appreciation everyone had for her.   No one praised her like   Heathcliff and Edgar praised Catherine, but no one hated her like Hindly hated   Heathcliff.   In fact, she's the "middle man" that makes the transition from   Wuthering Heights to Thrushcross Grange so smooth.   If she had not been the narrator we wouldn't know what went on at Thrushcross Grange.   Nelly manages to know what went on at Wuthering Heights because of her good relationship with everyone.   So even though Nelly is not present there, she still has the capabilities to know what's going on.     Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   There really isn't a mother figure in the story, but Nelly's role sure imply that she's the mother.   It's odd that every time a lad is born, the mother died during the birth, which led to Nelly's "mother like" role.   She didn't only play her "mother like" role with Hareton and Cathy, (the two lads who's mothers died during labor) but she also played her role with Heathcliff and Catherine.   When Heathcliff retaliated against Hindly and decided not to eat due to his pride; Nelly brought him some food and made sure he was okay. She also aided Catherine when she was mad at Edgar.   Nelly's role is so important, and an example of it is when Nelly visited Wuthering Heights and Hareton was throwing   rocks at her and cursing at her.   This would not have happened if Nelly was there, and Hareton would have learned how to read.